Pyronix KX10DP - motion detector with pet immune technology
Ex Tax: 20.66€
In Stock
Brand: Pyronix
Product Code: KX10DP

The KX10DP's intelligent Pet Immune technology differentiates between your pets and intruders with pet immunity for even larger pets (up to 24kg approximately the size of a Labrador).


  • 10m Pet immune detection up to 24kg animal
  • Selectable EOL (End Of Line) resistors
  • Blue wave technology
  • Auto sensitivity feature
  • Digital temperature compensation
  • Tamper proof brackets included
  • Sealed optics
  • ABS plastics
  • Complies with EN50131-1
  • Panel Type: Domestic

Pet Immune / 10m volumetric detector

The detectors intelligent PI (Pet Immune) technology analyses the difference between an intruder and a pet signal, with immunity up to 24kg and 10m coverage range.

Blue wave technology

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components:

  • The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges.
  • Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto sensitivity feature

Depending on the environment condition, the detector will automatically adjust the sensitivity

Digital temperature compensation

When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC)

Tamper proof brackets

Supplied with both wall & ceiling mount brackets which provides access for up to two 8 core cables (Tamper kit optional)

Sealed optics

Protects from possible infestation from insects, shields air movement in front of the pyro-electric sensor and protects against adverse reflections from inside the detector housing.

Selectable EOL resistors

The detectors incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.

ABS plastics

3mm polished finish, reduces electrostatic interference on the PIR sensor.

Technical specifications:

Detectors technical characteristics

  • Blue Wave technology Yes
  • Automatic sensitivity Yes
  • Set sensitivity Yes (Low)
  • Digital temperature compensation Yes
  • DEOL resistor on board Yes
  • Tamper protection Front and rear

Optical, lens and detection characteristics

  • Maximum range 10m
  • Animal immunity Up to 24kg
  • Detection speed0.3- 3.0m/s
  • Coverage angle 85 degree
  • Detection zones 52
  • Detection planes 5
  • Detection method Digital quad signal processing


  • Wall mounted Bracket included
  • Ceiling mounted Bracket included
  • Optimum coverage height 1.8 - 2.4m
  • Certified mounting height 2.4m

Environmental and operating features

  • Storage temperature -40°C to +80°C
  • Certified operating temperature -10°C to +40°C
  • Nominal operating temperature -30°C to 70°C
  • Physical dimensions (H x W x D) 117 x 69 x 50mm

Electrical & battery

  • Operating voltage 9-16V DC 13.8V DC typical
  • Quiescent current consumption 13mA @ 12V (Min), 16mA @ 12V (Max)
  • Contact Resistance <10 ohms
  • Relay outputs 50 mA 60 VDC, 42 VAC (RMS)
  • Tamper switch 12V 50mA

Certifications and warranty

  • Electrical conformity CE
  • EN Certificate EN50131-2-2:2008, EN50131-1:2006+A1:2009, PD6662:2010
  • Certification type IMQ
  • Certificate number CA12.01173
  • Environmental class II
  • Warranty 5 years
  • Security grade Grade 2

Write a review

Please login or register to review